Welcome to MacTalk Australia

the largest Australian community for Apple discussions and topics

Join the discussions, Register Now!
Results 1 to 2 of 2
  1. #1

    Join Date
    Feb 2009
    Location
    Asutralia
    Posts
    2

    Default Swapping over SATA drive - once done just connect external back up HD ?

    Hi all,

    I have a Late 2009 27" iMac which I have discovered has a SATA HD Seagate dated 11/2012 which was running silently. Either the GPU or Screen died (according to Apple Care phone support) giving yellow vertical lines.

    I replaced it with a Mid 2010 11.3 27" Imac and the Samsung SATA HD in it is grumbling away and has become a distraction. From what I've read its fairly normal for them.

    I wish to take the newer HD from the older machine and install it into the newer machine.

    1) will this HD work in this situation? will it need formatting? (I suspect not! as it came for another iMac)

    2) Once physically install is done and I correct to complete installation by holding Command R during start up and installing my external Back Up HD via USB to re-insall OS and all contained within ?

    Any advice appreciate to help this novice achieve and improvement to this out of date beast!!!!

  2. #2

    Default

    I too love out of date Apple, because modern day Apple is just obscenely expensive!

    As to your question - this site is dead. I suggest visiting http://appletalk.com.au/ and joining up there - That's where everyone who used to be here is hanging out... I'm sure someone there will be able to help.
    MacTalk - the bianca's of geekdom
    thecosmichobo - as seen on YouTube - "How Doomsday Should Have Ended!" "Bigger on the Inside?" "The Doctor Falls - With Hartnell!" and lots more!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •